Visbella exhaust pipe glue EG0075GY0P 75g
Visbella EG0075GY0P Exhaust Pipe Adhesive is a premier solution designed for sealing and repairing cracks in exhaust systems and pipes of motorcycles, cars, buses, and other machinery. This product is especially suited for high-temperature and heavy-load applications, effectively addressing cracks and damage caused by prolonged use and thermal stress. Featuring a specialized formula and strong adhesion capabilities, Visbella EG0075GY0P ensures durability and optimal performance for exhaust components, helping to maintain the functionality of vehicles and machinery under harsh conditions.
TECHNICAL SPECIFICATIONS | |
Brand | USA |
Manufactured | China |
Weight | 75 g |
Color | Gray |
Viscosity | Medium |
Feature | Non-flammable |
Heat Resistance | 1100°C (2012°F) |
Visbella EG0075GY0P Exhaust Pipe Adhesive is a specialized product designed for sealing and repairing cracks in exhaust components, motorcycle mufflers, car exhausts, buses, and other machinery parts that have cracked due to prolonged use and high-temperature stress.
APPLICATIONS:
- Sealing and repairing cracks in exhaust pipes and mufflers.
- Sealing joints in exhaust systems such as muffler parts, tailpipes, exhaust flanges, and emission filters.
- Can be used when installing new exhaust pipes to enhance the lifespan and seal of the exhaust system.
- Can seal cracks in tempered glass on induction cooktops.
PRODUCT FEATURES:
- High-temperature resistance up to 1100°C (2012°F).
- Thick consistency that does not sag during application.
- Excellent sealing capability to prevent gas, odor, and toxic emissions during operation.
- Can be applied to rusty surfaces after cleaning.
- Enhances the durability and heat resistance of exhaust pipes.
- Cost-effective by allowing reuse of cracked exhaust pipes without needing replacements.
USAGE INSTRUCTIONS:
- Clean the surface to be repaired with sandpaper, removing rust, dirt, and grease.
- Moisten the area to be repaired with a wet cloth, then apply the adhesive evenly to the damaged area. Adjust with a cloth and remove excess adhesive before it dries.
- Allow the adhesive to dry for 30 minutes, then start the engine for at least 10 minutes before use.
NOTE:
- Allow the adhesive to dry overnight or run the engine until the repair area is completely hardened.
- The product is suitable for cracks < 5mm and in stable positions such as muffler bodies and flat surfaces. Areas subject to vibration, such as flanges or connections, may cause the adhesive to crack or break.
- Do not apply to holes with a diameter greater than 1 cm.
PRODUCT DEMO VIDEO:
STORAGE AND USAGE NOTES:
- Keep out of reach of children.
- Store in a dry, cool place with temperatures below 25°C (77°F).
- The storage room temperature should not be too hot or too cold.
- Avoid exposure to water or areas with standing water as it can significantly impact health and agriculture if leakage occurs.
- Avoid prolonged exposure to heat sources and sunlight.
- Seal the container after use.
- Avoid inhaling fumes and contact with eyes. If the product gets into the eyes, rinse thoroughly with clean water and seek medical attention immediately.
VISBELLA BRAND:
Visbella - www.visbella.com - specializes in products for the transportation and household sectors, such as lubricants, adhesives, silicones, etc., manufactured by Huzhou Guoneng New Materia in China.
Established in 1997, Visbella products are now available in Mexico, Spain, European countries, and the United States.
