HT01 Cement, Green Moss, Rust, and Grout Cleaner 1.8L

PRODUCT FEATURES:

- Removes cement from ceramic tiles, red bricks, stone tiles, anti-slip tiles, faux wood tiles, or rough stone tiles.
- Whitens grout and brightens tiles.

- Effective in some cases for removing green moss, dirt, blackening, yellowing, and rust on tiles.
- Removes rust from iron, but it should be monitored as the product may corrode metal after removing rust.
- Saves time and effort in removing cement stains, cement residues, and buildups on tiles.

- Can remove cement from metal surfaces coated with paint such as rust-proof paint or electrostatic paint. However, it is recommended to test on a small area first before treating the entire surface.

Note: DO NOT use on stainless steel or inox surfaces as it may discolor the treated area.

- Does not affect the material, color, or lifespan of tiles.
- Ingredients: SO4<1%, Alcohol ethoxylated, Hydraclohidric, Cl 19140, tile protection agents, metal corrosion inhibitors, innox, H+ and other additives.

HT01 contains the active ingredient H+ in the form of ultra-fine crystals that penetrates deeply into crevices and rough surfaces of tiles or roof tiles, softening and breaking the bond of cement. Most importantly, the H+ active ingredient lifts the bonds off the tile surface through a foaming reaction, and the decomposing agents in the product completely dissolve the cement, leaving no white residue after cleaning. The final step is to rinse and wipe the tile surface with water.

HOW TO REMOVE CEMENT WITH H+T01:

Step 1: Clean the surface to be treated by scrubbing and washing with water, removing impurities such as sand, dust, etc. After scrubbing, let the surface dry completely (you may notice areas with mold or cement residues).

Step 2: Dilute the solution with water according to the surface type:

- For red bricks, stone tiles, and rough ceramic tiles: use undiluted.
- For smooth (glossy) ceramic tiles: dilute with water at a ratio of 1:1.
- For natural and artificial stone: dilute with water at a ratio of 1:1. Note: The manufacturer recommends testing on a small corner before treating the entire surface.

Step 3:

3.1. For thin layers of cement:

- Apply the cement remover to the area and use a pad to scrub evenly until the cement is fully dissolved.
- Wipe the treated area with a dry cloth.
- Rinse with clean water.

*Note: After scrubbing, do not rinse the surface with water immediately as water may dilute the cleaner and reduce its effectiveness. Wipe with a dry cloth and check if the surface is completely clean. Then, you can rinse with water.*

3.2. For thick, caked cement residues:

- Apply the cement remover to the area and wait for about 5-10 minutes for the solution to react and break down the cement.
- Use a steel wool pad (pot scrubber) to scrub the surface thoroughly. You can apply more cleaner while scrubbing and use a scraper to ease the process.
- Wipe the treated area with a dry cloth.
- Rinse with clean water.

*Note: After scrubbing, do not rinse the surface with water immediately as water may dilute the cleaner and reduce its effectiveness. Wipe with a dry cloth and check if the surface is completely clean. Then, you can rinse with water.*

USAGE AND STORAGE NOTES:

- Wear gloves and a mask during use for safety.
- Use undiluted or dilute according to the ratio provided for different tile types as indicated on the packaging to save costs.
- Prepare a scraper for thick cement residues, a rough pad, a brush for applying the solution, a bucket, and a cloth.
- Shake the product well before use for best results.
- For metal surfaces, marble, and painted surfaces, test on a small area and monitor to ensure the cleaner does not affect the surface before applying it to a larger area.

VIDEO DEMO ON HOW TO USE HT01 CEMENT CLEANER

STORAGE AND USAGE:

- Keep out of reach of children.
- Store in a warehouse. Ensure the storage temperature is neither too hot nor too cold.
- Avoid contact with water sources, drinking water, or agricultural areas.
- Avoid prolonged exposure to hot surfaces and sunlight.
- Close the cap tightly after use.
- Avoid inhaling fumes and contact with eyes. If the solution gets into eyes, rinse thoroughly with clean water and seek immediate medical attention at the nearest medical center or hospital.

BRAND TVS:

TVSis a brand manufactured in Vietnam by Total Cleaning Company, a professional cleaning service provider specializing in cement removers, glass cleaners, and cleaning equipment under the H+T01 product line.

HT01 is a powerful floor cleaner that, in addition to removing cement, can also clean moss, lime, cement residues, and various paint stains from different surfaces like ceramic tiles, rough stones, red bricks, and roof tiles without affecting the material surface. The product can be diluted to save costs.